Super Series
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.
Request Information
Unit of Measure
Items
Super Series Chains

Super Series Chains
Super Series Chains

Super Series Chains
Super Series Chains

Super Series Chains
Super Series Chains

Super Series Chains
Super Series Chains

Super Series Chains
ANSI No. N/A 80 N/A 100 N/A 120 N/A 140 N/A 160
Standard Type of Pin N/A Riveted
Strand N/A Single
P - Pitch N/A 1.000 in N/A 1.250 in N/A 1.500 in N/A 1.750 in N/A 2.000 in
R - Roller Diameter N/A 0.625 in N/A 0.750 in N/A 0.875 in N/A 1.000 in N/A 1.125 in
W - Width Between Roller Link Plates N/A 0.625 in N/A 0.750 in N/A 1.000 in N/A 1.000 in N/A 1.250 in
T N/A 0.125 in N/A 0.156 in N/A 0.187 in N/A 0.219 in N/A 0.250 in
H N/A 0.949 in N/A 1.185 in N/A 1.425 in N/A 1.661 in N/A 1.898 in
h N/A 0.819 in N/A 1.024 in N/A 1.228 in N/A 1.433 in N/A 1.638 in
D N/A 0.312 in N/A 0.375 in N/A 0.437 in N/A 0.500 in N/A 0.562 in
L1 N/A 0.640 in N/A 0.778 in N/A 0.980 in N/A 1.059 in N/A 1.254 in
L2 N/A 0.758 in N/A 0.900 in N/A 1.138 in N/A 1.248 in N/A 1.451 in
C - Transverse Pitch N/A 1.153 in N/A 1.408 in N/A 1.789 in N/A 1.924 in N/A 2.305 in
Average Tensile Strength N/A 19100 lb N/A 28600 lb N/A 41800 lb N/A 55100 lb N/A 70500 lb
Maximum Allowable Load N/A 4180 lb N/A 6830 lb N/A 8810 lb N/A 12100 lb N/A 15800 lb