Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Unit of Measure
Specifications
ANSI No. |
N/A 100 |
Standard Type of Pin |
N/A Riveted |
Strand |
N/A Double |
P - Pitch |
N/A 1.250 in |
R - Roller Diameter |
N/A 0.750 in |
W - Width Between Roller Link Plates |
N/A 0.750 in |
C - Transverse Pitch |
N/A 1.539 in |
Average Tensile Strength |
N/A 65200 lb |
Maximum Allowable Load |
N/A 12360 lb |
UPC Code |
N/A 097039624062 |
