Request Information
The main characteristic of this chain is that it has an engineering plastic sleeve between the pin and bushing. The engineering plastic roller is also available in combination with the engineering plastic sleeve.
Unit of Measure

Specifications

Attachment Number

 N/A SA-2

D

 N/A 0.156 in

Chain Specifications

P - Pitch

 N/A 1.000 in

W - Width Between Inner Link Plates

 N/A 0.312 in

R - Roller Diameter

 N/A 0.625 in

Maximum Allowable Load

 N/A 100 lb

Allowable Roller Load

 N/A 44 lbs/roller

Approx. Weight

 N/A 0.336 lbs/ft

Material 

 N/A Standard

Roller Style

 N/A "R" Roller

Roller Material

 N/A Plastic Roller

t - Link Plate

 N/A 0.060 in

h - Link Plate

 N/A 0.472 in

Spacing

 N/A At every link

Link Plate

H

 N/A 0.472 in

T

 N/A 0.060 in

Pin Specifications

D

 N/A 0.156 in

L1

 N/A 0.325 in

L2

 N/A 0.392 in

Attachment Specifications

K

 N/A 0.374 in

N

 N/A 0.752 in

O

 N/A 0.142 in

Xs

 N/A 0.780 in

C2

 N/A 0.535 in

Information

N/A

  • The use of self-lubricating engineering plastic sleeves eliminates the need for lubrication.
  • Excellent wear resistance ensures long life.
  • Since no metal dust is generated from contact between the engineering plastic parts and the steel parts, your environment and equipment are kept clean. A When using the stainless steel chain series, corrosion resistance is also increased.
  • The use of engineering plastic rollers results in significant weight reduction compared to all stainless steel chain (small "S" roller type: 15% less, oversize "R" roller type: 40% less).
  • With the use of engineering plastic sleeves and rollers, quiet operation is
  • RS40, RS50 and RS60 with plastic sleeves are available upon request. Contact U.S. Tsubaki for details.
Standard Series : Engineering plastic roller and sleeve, other components steel.
Stainless Steel Series : Engineering plastic roller and sleeve, other components 304 stainless steel.