Request Information
The main characteristic of this chain is that it has an engineering plastic sleeve between the pin and bushing. The engineering plastic roller is also available in combination with the engineering plastic sleeve.
Unit of Measure

Specifications

Attachment Number

 N/A SA-1

D

 N/A 0.234 in

Chain Specifications

P - Pitch

 N/A 1.500 in

W - Width Between Inner Link Plates

 N/A 0.500 in

R - Roller Diameter

 N/A 0.875 in

Maximum Allowable Load

 N/A 231 lb

Allowable Roller Load

 N/A 110 lbs/roller

Approx. Weight

 N/A 0.974 lbs/ft

Material 

 N/A Standard

Roller Style

 N/A "R" Roller

t - Link Plate

 N/A 0.125 in

h - Link Plate

 N/A 0.677 in

Spacing

 N/A At every 2nd link

Link Plate

H

 N/A 0.677 in

T

 N/A 0.125 in

Pin Specifications

D

 N/A 0.234 in

L1

 N/A 0.573 in

L2

 N/A 0.652 in

Attachment Specifications

N

 N/A 1.126 in

Xs

 N/A 1.205 in

C1

 N/A 0.689 in

O1

 N/A 0.343 in

Information

N/A

  • The use of self-lubricating engineering plastic sleeves eliminates the need for lubrication.
  • Excellent wear resistance ensures long life.
  • Since no metal dust is generated from contact between the engineering plastic parts and the steel parts, your environment and equipment are kept clean. A When using the stainless steel chain series, corrosion resistance is also increased.
  • The use of engineering plastic rollers results in significant weight reduction compared to all stainless steel chain (small "S" roller type: 15% less, oversize "R" roller type: 40% less).
  • With the use of engineering plastic sleeves and rollers, quiet operation is
  • RS40, RS50 and RS60 with plastic sleeves are available upon request. Contact U.S. Tsubaki for details.
Standard Series : Engineering plastic roller and sleeve, other components steel.
Stainless Steel Series : Engineering plastic roller and sleeve, other components 304 stainless steel.