3 straight points on every pitch
Unit of Measure
P - Pitch |
N/A 0.750 in |
R - Roller Diameter |
N/A 0.469 in |
W - Width Between Inner Link Plates |
N/A 0.500 in |
T - Link Plate Thickness |
N/A 0.094 in |
T1 - Link Plate Thickness |
N/A 0.094 in |
H - Link Plate Height |
N/A 0.854 in |
h1- Link Plate Height |
N/A 0.712 in |
h2 - Link Plate Height |
N/A 0.498 in |
h3 - Link Plate Tooth Height |
N/A 0.094 in |
D - Pin Diameter |
N/A 0.235 in |
MLP - Middle Link Plate Thickness |
N/A 0.000 in |
L2 - Pin Length |
N/A 0.581 in |
L1 - Pin Length |
N/A 0.506 in |
L1+L2 - Pin Length |
N/A 1.087 in |
L3 - Riveted Pin Length |
N/A 1.012 in |
L4 - Length Ref. |
N/A 0.898 in |
C - Transverse Pitch |
N/A 0.000 in |
Approx. Weight |
N/A 1.26 lb/ft |
