Request Information
To order attachment chain, please provide the following:

1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
    Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the non-standard spacing example to the right, initial spacing is every 2nd (2L) and then every 4th (4L). Each repeating section is 8 pitches (8L).

6) Overall length of chain

ASME (ANSI) Special Attachments

In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.

When specifying non-standard attachments, information required is:
  • tab length, width and possibly height
  • hole diameter and type of hole (threaded, countersunk)
  • pin diameter, projection (extension) length, type of end (threaded, circlip groove)
Unit of Measure

Pitch - P

 N/A 1.250 in

XS - Attachment

 N/A 0.969 in

C1 - Attachment

 N/A 0.563 in

N - Attachment

 N/A 0.937 in

O1 - Attachment

 N/A 0.268 in

Attachment Thickness - T

 N/A 0.079 in

Additiomal Wt. per Attach. SK Attachment

 N/A 0.026 lb