Tsubaki of Canada produces high-quality products for a wide range of industries and applications including roller chains, conveyor chains, sprockets, cable & hose carrier systems, clutches and backstops, and continuous flex cables.
Knowledge Center
Tsubaki is offering tips and solutions to the most pressing problems that are often encountered in day-to-day operations.
Metric bore sizes are available upon request and are subject to an alteration charge shown on discount multiplier sheets.
All TAPER-LOCK Bushings are available in steel from stock. Stainless steel bushings are available on a quoted basis.
Unit of Measure
Specifications
Bushing
N/A1210
Bore Range1
N/A0.500 to 1.250 in
A
N/A1.875 in
B
N/A1.000 in
D
N/A1.750 in
F2
N/A3/8 x 5/8 in
L - Short Hex Key3
N/A1.375 in
L - Standard Key4
N/A0.813 in
M - Short Hex Key5
N/A1.625 in
M - Key6
N/A1.063 in
Weight
N/A0.550 lb
1 All bore ranges available in 1/16th inch increments.
2 2 Required
3 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
4 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller. Standard hex key cut to minimum usable length.
5 Space required to remove bushing using jackscrews - no puller required.
6 Space required to remove bushing using jackscrews - no puller required. Standard hex key cut to minimum usable length.
Link To Knowledge Center
Tsubaki is offering tips and solutions to the most pressing problems that are often encountered in day-to-day operations.
