Tsubaki of Canada
Head Office & Manufacturing Plant
1630 Drew Road
Mississauga, Ontario L5S 1J6

Toll Free: (905) 676-0400, (800) 263-7088
After Hours Number: (905) 601-3043
Fax: (905) 676-0904
Email: insidesales@tsubaki.ca
Website: www.tsubaki.ca
Print Back
Crossrod conveyor chain consists of two parallel strands of standard RS40 or RS50 chains, joined by crossrods on every link. RS40 chain is used for light loads such as conveying bread through coolers, wrappers and slicers. RS50 chain is for heavier loads. When sanitary, noncorrosive qualities are required, crossrods can be stainless steel.
The connecting pins have milled flats and fit into a D-shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in five-foot sections and run on standard ASME/ANSI sprockets. Removable two-pitch link sections are available for repair.
RS 40 Crossrod Conveyor Chain
RS 40 Crossrod Conveyor Chain - 2
Unit of Measure
Items RS 40 Crossrod Conveyor Chain
P800-12
RS 50 Crossrod Conveyor Chain 		RS 40 Crossrod Conveyor Chain
P800-15
RS 50 Crossrod Conveyor Chain 		RS 40 Crossrod Conveyor Chain
P800-18
RS 50 Crossrod Conveyor Chain 		RS 40 Crossrod Conveyor Chain
P800-21
RS 50 Crossrod Conveyor Chain 		RS 40 Crossrod Conveyor Chain
P800-24
RS 50 Crossrod Conveyor Chain
Description N/A RS 50 Chain with .625 Pitch, .200" Pin Diameter

Crossrod conveyor chain consists of two parallel strands of standard RS40 or RS50 chains, joined by crossrods on every link. RS40 chain is used for light loads such as conveying bread through coolers, wrappers and slicers. RS50 chain is for heavier loads. When sanitary, noncorrosive qualities are required, crossrods can be stainless steel.
The connecting pins have milled flats and fit into a D-shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in five-foot sections and run on standard ASME/ANSI sprockets. Removable two-pitch link sections are available for repair.
All dimensions are nominal values and for reference only
Pitch N/A 0.625 in
Pin Diameter N/A 0.200 in
Nominal Width N/A 12.000 in N/A 15.000 in N/A 18.000 in N/A 21.000 in N/A 24.000 in
A - Plate to Plate Width N/A 11.100 in N/A 14.100 in N/A 17.100 in N/A 20.100 in N/A 23.100 in
B - Overall Riveted N/A 12.600 in N/A 15.600 in N/A 18.600 in N/A 21.600 in N/A 24.600 in
C - From Pin Head to End N/A 12.670 in N/A 15.670 in N/A 18.670 in N/A 21.670 in N/A 24.670 in
D - Roller C.L. to C.L. N/A 11.812 in N/A 14.812 in N/A 17.812 in N/A 20.812 in N/A 23.812 in
Chain Type N/A RS50
Information N/A Chains are available in carbon steel and stainless steel. Crossrods may be ordered in spring steel or stainless steel. One connecting pin is supplied with each chain section for connection. Additional pins may be ordered separately. Specify chain number and material combination desired. All sprockets should be ordered in pairs with key- ways in line to evenly distribute loads to both chains.
Average Weight N/A 2.200 lbs/ft N/A 2.800 lbs/ft N/A 3.30 lbs/ft N/A 3.60 lbs/ft N/A 4.10 lbs/ft