Tsubaki of Canada Limited - POWER-LOCK TF Metric Series Keyless Locking Device

Designed to fit small hub diameters

Tapered design allows for accurate shaft to hub alignement

Available in metric sizes from: 5mm - 100mm

P and P' represent the average contact pressure applied to the shaft and hub respectively. These values may vary from -20% to +40%, depending on the amount of friction applied to the bolts. Transmissible torque Mt and transmissible thrust Pax are calculated from the minimum allowable contact pressure.

Notes)

1. Stocked models are in bold.

2. Mt indicates torque at 0 transmissible thrust, while Pax indicates transmissible thrust at 0 torque. If transmissible torque and thrust apply simultaneously calculate and compare the combined value with the transmissible torque provided in the table.

3. Dimensions when this product is attached to the shaft and hub.

Power Lock TF Metric Series Keyless Locking Device

Power Lock TF Metric Series Keyless Locking Device-2

Unit of Measure

Items	PL006X012TF POWER-LOCK TF Metric Series Keyless Locking Device	PL085X106TF POWER-LOCK TF Metric Series Keyless Locking Device	PL007x012TF POWER-LOCK TF Metric Series Keyless Locking Device	PL008X015TF POWER-LOCK TF Metric Series Keyless Locking Device	PL010X018TF POWER-LOCK TF Metric Series Keyless Locking Device
d - Shaft O.D.	N/A 0.236 in6 mm	N/A 3.346 in85 mm	N/A 0.276 in7 mm	N/A 0.315 in8 mm	N/A 0.394 in10 mm
t1 - Shaft Dia. Tolerance	N/A -0.0007 in +0	N/A -0.0021 in +0	N/A -0.0009 in +0	N/A -0.0009 in +0	N/A -0.0009 in +0
D - Hub Counter I.D.	N/A 0.472 in12 mm	N/A 4.173 in106 mm	N/A 0.472 in12 mm	N/A 0.591 in15 mm	N/A 0.709 in18 mm
t2 - Hub Counter ID Tolerance	N/A +0.0011 in -0	N/A +0.0021 in -0	N/A +0.0011 in -0	N/A +0.0011 in -0	N/A +0.0011 in -0
l	N/A 0.394 in10 mm	N/A 2.559 in65 mm	N/A 0.394 in10 mm	N/A 0.472 in12 mm	N/A 0.551 in14 mm
L0	N/A 0.748 in19 mm	N/A 3.386 in86 mm	N/A 0.748 in19 mm	N/A 0.866 in22 mm	N/A 0.906 in23 mm