Tsubaki of Canada
Head Office & Manufacturing Plant
1630 Drew Road
Mississauga, Ontario L5S 1J6

Toll Free: (905) 676-0400, (800) 263-7088
After Hours Number: (905) 601-3043
Fax: (905) 676-0904
Email: insidesales@tsubaki.ca
Website: www.tsubaki.ca
Print Back
To order attachment chain, please provide the following:
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
    Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the non-standard spacing example to the right, initial spacing is every 2nd (2L) and then every 4th (4L). Each repeating section is 8 pitches (8L).

6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.

When specifying non-standard attachments, information required is:
  • tab length, width and possibly height
  • hole diameter and type of hole (threaded, countersunk)
  • pin diameter, projection (extension) length, type of end (threaded, circlip groove)

Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
Unit of Measure
Items Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
C2040 - SA-2 Attachment
Standard Attachment Chain - Double Pich, SA-2 Attachment 		Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
C2050 - SA-2 Attachment
Standard Attachment Chain - Double Pich, SA-2 Attachment 		Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
C2060H - SA-2 Attachment
Standard Attachment Chain - Double Pich, SA-2 Attachment 		Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
C2080H - SA-2 Attachment
Standard Attachment Chain - Double Pich, SA-2 Attachment 		Standard-Attachment-Chain---Double-Pich--SA-2-Attachment
C2100H - SA-2 Attachment
Standard Attachment Chain - Double Pich, SA-2 Attachment
Pitch - P N/A 1.000 in N/A 1.250 in N/A 1.500 in N/A 2.000 in N/A 2.500 in
XS - Attachment N/A 0.780 in N/A 0.969 in N/A 1.205 in N/A 1.594 in N/A 1.984 in
C2 - Attachment N/A 0.535 in N/A 0.626 in N/A 0.750 in N/A 1.000 in N/A 1.250 in
K - Attachment N/A 0.374 in N/A 0.469 in N/A 0.563 in N/A 0.752 in N/A 0.938 in
N - Attachment N/A 0.752 in N/A 0.937 in N/A 1.126 in N/A 1.500 in N/A 1.875 in
O - Attachment N/A 0.142 in N/A 0.205 in N/A 0.205 in N/A 0.268 in N/A 0.323 in
O1 - Attachment N/A 0.14 in N/A 0.21 in N/A 0.21 in N/A 0.27 in N/A 0.32 in
Attachment Thickness - T N/A 0.059 in N/A 0.079 in N/A 0.126 in N/A 0.156 in N/A 0.187 in
Additiomal Wt. per Attach. SA Attachment N/A 0.007 lb N/A 0.013 lb N/A 0.037 lb N/A 0.07 lb N/A 0.132 lb