Item # ST508SS, Roller Table ST Type On Tsubaki of Canada Limited

Does not damage conveyed materials
Transfers materials smoothly to other lines
Wide selection available in a variety of designs
Easy to assemble and disassemble
RT type Roller Table chain provides a low friction alternative to table top chain
ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)

Unit of Measure

Common Dimensions | Specifications

Common Dimensions

P - Pitch	N/A 0.625 in
W - Width Between Roller Link Plates	N/A 0.375 in
R1 - Roller Diameter	N/A 0.400 in
h1 - Attachment Height	N/A 0.280 in
h2 - Link Plate Height	N/A 0.335 in
N - Attachment Width	N/A 1.201 in
T1 - Attachment Plate Thickness	N/A 0.059 in
T2 - Link Plate Thickness	N/A 0.079 in
d1 - Pin Diameter	N/A 0.200 in
R2 - Plastic Roller Diameter	N/A 0.591 in
L2 - Plastic Roller Length	N/A 0.984 in
Maximum Allowable Conveying Load	N/A 72 lb/ft²

Specifications

C1 - Effective Width	N/A 7.921 in
C2 - Overall Width	N/A 9.654 in
C3 - Center Distance between Two Chains	N/A 8.622 in
L1 - Pin Overall Length	N/A 9.559 in

Common Dimensions

P - Pitch

W - Width Between Roller Link Plates

R1 - Roller Diameter

h1 - Attachment Height

h2 - Link Plate Height

N - Attachment Width

T1 - Attachment Plate Thickness

T2 - Link Plate Thickness

d1 - Pin Diameter

R2 - Plastic Roller Diameter

L2 - Plastic Roller Length

Maximum Allowable Conveying Load

Specifications

C1 - Effective Width

C2 - Overall Width

C3 - Center Distance between Two Chains

L1 - Pin Overall Length