Chain Number C2100H - SA-1 Attachment, Standard Attachment Chain - Double Pich, SA-1 Attachment On Tsubaki of Canada Limited

To order attachment chain, please provide the following:

1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment

Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the non-standard spacing example to the right, initial spacing is every 2nd (2L) and then every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain

ASME (ANSI) Special Attachments

In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.

When specifying non-standard attachments, information required is:

tab length, width and possibly height
hole diameter and type of hole (threaded, countersunk)
pin diameter, projection (extension) length, type of end (threaded, circlip groove)

Unit of Measure

Specifications

Pitch - P	N/A 2.500 in
XS - Attachment	N/A 1.984 in
C1 - Attachment	N/A 1.125 in
N - Attachment	N/A 1.875 in
O1 - Attachment	N/A 0.563 in
Attachment Thickness - T	N/A 0.187 in
Additiomal Wt. per Attach. SA Attachment	N/A 0.132 lb

Specifications

Pitch - P

XS - Attachment

C1 - Attachment

N - Attachment

O1 - Attachment

Attachment Thickness - T

Additiomal Wt. per Attach. SA Attachment