BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.

Notes:
Keyway No Mark on Bore Size...ISOR773 DIN6885.1
Overrunning speed of inner race should not be below under continuous operation.
Engagement speed must not be exceeded when transmitting torque.
Unit of Measure

Specifications

UPC Code

N/A 097039685476

Torque Capacity

N/A 77.4 lb·ft105.0 N·m

Min. Inner Race Overrunning Speed

N/A 880 rpm

Max. Inner Race Overrunning Speed

N/A 3600 rpm

Max. Engagement

N/A 550 rpm

Bore Size

N/A 0.787 in20.00 mm

A (Inner Race Width)

N/A 0.945 in24.00 mm

B (Outer Race Width)

N/A 0.984 in25.00 mm

C (Outer Race O.D.)

N/A 3.346 in85.00 mm

D (Outer Race I.D.)

N/A 2.165 in55.00 mm

E (Inner Race O.D.)

N/A 1.181 in30.00 mm

G (Bolt Circle Diameter)

N/A 2.756 in70.00 mm

Q-R (Mounting Holes Quantity - Size)

N/A 6-M6

S-T (Removed Holes Quantity - Size)

N/A 2-M6

F (Cam Width)

N/A 0.669 in17.00 mm

Weight

N/A 1.760 lb0.800 kg

H (Housing Bore Min.)

N/A 1.772 in45.00 mm

M (Counter Bore Depth Max.)

N/A 0.118 in3.00 mm

N (Chamfer)

N/A 0.039 in1.00 mm