Tsubaki of Canada
Head Office & Manufacturing Plant
1630 Drew Road
Mississauga, Ontario L5S 1J6

Toll Free: (905) 676-0400, (800) 263-7088
After Hours Number: (905) 601-3043
Fax: (905) 676-0904
Email: insidesales@tsubaki.ca
Website: www.tsubaki.ca
Print Back
ATC CHAIN HP-T TYPE WITH TOOL HOLDER
HP-T type ATC chain is based on the HP type with steel tool holder. The inner diameter of the pin is tapered and a retaining function is installed on the pin.
Economical: Additional installation of the tool holder is not necessary.
Accurate holding: As the tool holder is combined with the chain, backlash is reduced.
Compactness: Pin outer diameter and link plate width are smaller than those of HP type.
1) U.S. Tsubaki standardized ATC chain is designed withmore
ATC Chain HP-T Type
ATC Chain HP-T Type - 2
Unit of Measure
1 

Item #

Shank Number

P - Pitch

R - Roller Diameter

W - Width Between Roller Link Plates

T

H

HP-T-40-3.543 N/A 40 N/A 3.543 in N/A 2.362 in N/A 2.362 in N/A 0.157 in N/A 3.288 in
HP-T-40-3.937 N/A 40 N/A 3.937 in N/A 2.362 in N/A 2.362 in N/A 0.157 in N/A 3.288 in
HP-T-50-5.118 N/A 50 N/A 5.118 in N/A 2.362 in N/A 2.362 in N/A 0.157 in N/A 3.288 in
HP-T-50-5.512 N/A 50 N/A 5.512 in N/A 3.228 in N/A 3.228 in N/A 0.248 in N/A 4.252 in
HP-T-50-6.299 N/A 50 N/A 6.299 in N/A 3.228 in N/A 3.228 in N/A 0.248 in N/A 4.252 in
Unit of Measure
1