To send your information to Tsubaki, press this button
- Does not damage conveyed materials
- Transfers materials smoothly to other lines
- Wide selection available in a variety of designs
- Easy to assemble and disassemble
- RT type Roller Table chain provides a low friction alternative to table top chain
- ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
- Standard sprockets can be used
Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)
Unit of Measure
Common Dimensions
P - Pitch |
N/A
0.500 |
W - Width Between Roller Link Plates |
N/A
0.313 |
R1 - Roller Diameter |
N/A
0.313 |
h1 - Attachment Height |
N/A
0.224 |
h2 - Link Plate Height |
N/A
0.276 |
N - Attachment Width |
N/A
0.961 |
T1 - Attachment Plate Thickness |
N/A
0.047 |
T2 - Link Plate Thickness |
N/A
0.059 |
d1 - Pin Diameter |
N/A
0.154 |
R2 - Plastic Roller Diameter |
N/A
0.472 |
L2 - Plastic Roller Length |
N/A
0.984 |
Maximum Allowable Conveying Load |
N/A
51 |
