Standard Attachment Chain - Double Pich, D-3 Attachment

To order attachment chain, please provide the following:

Size of chain (40, 50, C2062H)
Material
Rivet or Cotter Pin construction
Type of attachment
Spacing of attachment
- Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the non-standard spacing example to the right, initial spacing is every 2nd (2L) and then every 4th (4L). Each repeating section is 8 pitches (8L).
Overall length of chain

ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.

When specifying non-standard attachments, information required is:

tab length, width and possibly height
hole diameter and type of hole (threaded, countersunk)
pin diameter, projection (extension) length, type of end (threaded, circlip groove)

Standard-Attachment-Chain---Double-Pich--D-3-Attachment

Unit of Measure

Items	C2040 - D-3 Attachment Standard Attachment Chain - Double Pich, D-3 Attachment	C2050 - D-3 Attachment Standard Attachment Chain - Double Pich, D-3 Attachment	C2060H - D-3 Attachment Standard Attachment Chain - Double Pich, D-3 Attachment	C2080H - D-3 Attachment Standard Attachment Chain - Double Pich, D-3 Attachment	C2100H - D-3 Attachment Standard Attachment Chain - Double Pich, D-3 Attachment
Pitch - P	N/A 1.000 in	N/A 1.250 in	N/A 1.500 in	N/A 2.000 in	N/A 2.500 in
D - Attachment	N/A 0.156 in	N/A 0.200 in	N/A 0.234 in	N/A 0.312 in	N/A 0.375 in
L3 - Attachment	N/A 0.374 in	N/A 0.469 in	N/A 0.563 in	N/A 0.752 in	N/A 0.937 in
L4 - Attachment	N/A 0.663 in	N/A 0.833 in	N/A 1.083 in	N/A 1.401 in	N/A 1.687 in
Additiomal Wt. per Attach. D-3 Attachment	N/A 0.004 lb	N/A 0.008 lb	N/A 0.014 lb	N/A 0.03 lb	N/A 0.052 lb