To order attachment chain, please provide the following:

1. Size of chain (40, 50, C2062H)
2. Material
3. Rivet or Cotter Pin construction
4. Type of attachment
5. Spacing of attachment
   • Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the non-standard spacing example to the right, initial spacing is every 2nd (2L) and then every 4th (4L). Each repeating section is 8 pitches (8L).
6. Overall length of chain

 
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.

When specifying non-standard attachments, information required is:

• tab length, width and possibly height
• hole diameter and type of hole (threaded, countersunk)
• pin diameter, projection (extension) length, type of end (threaded, circlip groove)