Standard Attachment Chain
standard-attachment-chain
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--SA-1-Attachment.jpg
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--SA-2-Attachment.jpg
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--SK-1-Attachment.jpg
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--SK-2-Attachment.jpg
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--D-1-Attachment.jpg
1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
/Asset/Standard-Attachment-Chain---Double-Pich--D-3-Attachment.jpg
Standard Attachment Chain - Double Pich, SA-1 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--SA-1-Attachment.jpg
Standard Attachment Chain - Double Pich, SA-2 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--SA-2-Attachment.jpg
Standard Attachment Chain - Double Pich, SK-1 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--SK-1-Attachment.jpg
Standard Attachment Chain - Double Pich, SK-2 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--SK-2-Attachment.jpg
Standard Attachment Chain - Double Pich, D-1 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--D-1-Attachment.jpg
Standard Attachment Chain - Double Pich, D-3 Attachment
(7) To order attachment chain, please provide the following:1) Size of chain (40, 50, C2062H)
2) Material
3) Rivet or Cotter Pin construction
4) Type of attachment
5) Spacing of attachment
-
Attachment spacing is counted as being the number of
links (both inside and outside) up to and including the
next attachment. In the non-standard spacing example
to the right, initial spacing is every 2nd (2L) and then
every 4th (4L). Each repeating section is 8 pitches (8L).
6) Overall length of chain
ASME (ANSI) Special Attachments
In addition to providing standard attachment chain, Tsubaki of Canada can modify existing attachments to match your requirements.
An example of this could be a shorter-than-standard pin or a larger hole diameter. If modifying standard attachments, delivery can be 1-2 weeks depending on the quantity.
When specifying non-standard attachments, information required is:
- tab length, width and possibly height
- hole diameter and type of hole (threaded, countersunk)
- pin diameter, projection (extension) length, type of end (threaded, circlip groove)
/Asset/Standard-Attachment-Chain---Double-Pich--D-3-Attachment.jpg
