TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch nextmore to a bearing which handles both the axial and radial loads is the typical application. less
Unit of Measure
Specifications
UPC Code |
N/A 097039970763 |
Bore Size |
N/A 0.472 in12.00 mm |
Torque Capacity |
N/A 13.3 lb·ft18.0 N·m |
Max. Overrunning Inner Race |
N/A 4500 rpm |
Max. Overrunning Outer Race |
N/A 2300 rpm |
Drag Torque |
N/A 0.030 lb·ft0.04 N·m |
Keyway |
N/A 4 x 1.8 mm |
A (Overall Width) |
N/A 0.512 in13.00 mm |
B (Overall Diameter) |
N/A 1.378 in35.00 mm |
C (Outer Race I.D.) |
N/A 1.181 in30.00 mm |
D (Inner Race I.D.) |
N/A 0.709 in18.00 mm |
E (Chamfer) |
N/A 0.024 in0.60 mm |
F (Chamfer) |
N/A 0.012 in0.30 mm |
G (Slot Width) |
N/A 0.157 in4.00 mm |
H (Slot Depth) |
N/A 0.055 in0.06 mm |
Weight |
N/A 0.150 lb0.068 kg |
