TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unit of Measure
Specifications
UPC Code |
N/A 097039257680 |
Bore Size |
N/A 1.772 in45.00 mm |
Torque Capacity |
N/A 557.6 lb·ft756.0 N·m |
Max. Overrunning Inner Race |
N/A 1100 rpm |
Max. Overrunning Outer Race |
N/A 550 rpm |
Drag Torque |
N/A 0.413 lb·ft0.56 N·m |
Keyway |
N/A 14 x 2.1 mm |
A (Overall Width) |
N/A 1.417 in36.00 mm |
B (Overall Diameter) |
N/A 3.937 in100.00 mm |
C (Outer Race I.D.) |
N/A 3.358 in85.30 mm |
D (Inner Race I.D.) |
N/A 2.323 in59.00 mm |
E (Chamfer) |
N/A 0.071 in1.80 mm |
F (Chamfer) |
N/A 0.039 in1.00 mm |
G (Slot Width) |
N/A 0.551 in14.00 mm |
H (Slot Depth) |
N/A 0.181 in0.18 mm |
Weight |
N/A 3.014 lb1.370 kg |
