Tsubaki of Canada
Head Office & Manufacturing Plant
1630 Drew Road
Mississauga, Ontario L5S 1J6

Toll Free: (905) 676-0400, (800) 263-7088
After Hours Number: (905) 601-3043
Fax: (905) 676-0904
Email: insidesales@tsubaki.ca
Website: www.tsubaki.ca
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039687968

Torque Capacity

 N/A 47203.8 lb·ft64000.0 N·m

Min. Inner Race Overrunning Speed

 N/A 210 rpm

Max. Inner Race Overrunning Speed

 N/A 1300 rpm

Max. Engagement

 N/A 100 rpm

Bore Size

 N/A 7.283 in185.00 mm

A (Inner Race Width)

 N/A 4.724 in120.00 mm

B (Outer Race Width)

 N/A 4.921 in125.00 mm

C (Outer Race O.D.)

 N/A 16.535 in420.00 mm

D (Outer Race I.D.)

 N/A 12.205 in310.00 mm

E (Inner Race O.D.)

 N/A 9.567 in243.00 mm

G (Bolt Circle Diameter)

 N/A 14.567 in370.00 mm

Q-R (Mounting Holes Quantity - Size)

 N/A 16-M24

S-T (Removed Holes Quantity - Size)

 N/A 2-M24

F (Cam Width)

 N/A 3.780 in96.00 mm

Weight

 N/A 184.800 lb84.000 kg

H (Housing Bore Min.)

 N/A 11.024 in280.00 mm

M (Counter Bore Depth Max.)

 N/A 0.492 in12.50 mm

N (Chamfer)

 N/A 0.079 in2.00 mm