Tsubaki of Canada
Head Office & Manufacturing Plant
1630 Drew Road
Mississauga, Ontario L5S 1J6

Toll Free: (905) 676-0400, (800) 263-7088
After Hours Number: (905) 601-3043
Fax: (905) 676-0904
Email: insidesales@tsubaki.ca
Website: www.tsubaki.ca
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039688705

Torque Capacity

 N/A 162263.2 lb·ft220000.0 N·m

Min. Inner Race Overrunning Speed

 N/A 190 rpm

Max. Inner Race Overrunning Speed

 N/A 1000 rpm

Max. Engagement

 N/A 100 rpm

Bore Size

 N/A 10.236 in260.00 mm

A (Inner Race Width)

 N/A 9.843 in250.00 mm

B (Outer Race Width)

 N/A 9.843 in250.00 mm

C (Outer Race O.D.)

 N/A 22.835 in580.00 mm

D (Outer Race I.D.)

 N/A 16.929 in430.00 mm

E (Inner Race O.D.)

 N/A 14.291 in363.00 mm

G (Bolt Circle Diameter)

 N/A 19.685 in500.00 mm

Q-R (Mounting Holes Quantity - Size)

 N/A 24-M30

S-T (Removed Holes Quantity - Size)

 N/A 2-M30

F (Cam Width)

 N/A 6.850 in174.00 mm

Weight

 N/A 710.600 lb323.000 kg

H (Housing Bore Min.)

 N/A 15.748 in400.00 mm

M (Counter Bore Depth Max.)

 N/A 1.417 in36.00 mm

N (Chamfer)

 N/A 0.118 in3.00 mm