To send your information to Tsubaki, press this button
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unit of Measure
Specifications
UPC Code |
N/A
097039874917 |
Bore Size |
N/A
0.591 15.00 |
Torque Capacity |
N/A
20.7 28.0 |
Max. Overrunning Inner Race |
N/A
3500 |
Max. Overrunning Outer Race |
N/A
1800 |
Drag Torque |
N/A
0.044 0.06 |
Keyway |
N/A
5 x 1.2 mm |
A (Overall Width) |
N/A
0.709 18.00 |
B (Overall Diameter) |
N/A
1.654 42.00 |
C (Outer Race I.D.) |
N/A
1.417 36.00 |
D (Inner Race I.D.) |
N/A
0.866 22.00 |
E (Chamfer) |
N/A
0.031 0.80 |
F (Chamfer) |
N/A
0.012 0.30 |
G (Slot Width) |
N/A
0.197 5.00 |
H (Slot Depth) |
N/A
0.071 0.07 |
Weight |
N/A
0.264 0.120 |
