Request Information
Metric bore sizes are available upon request and are subject to an alteration charge shown on discount multiplier sheets.

All TAPER-LOCK Bushings are available in steel from stock.
Stainless steel bushings are available on a quoted basis.
Unit of Measure

Specifications

Bushing

 N/A 1615
Bore Range1 N/A 0.500 to 1.625 in

A

 N/A 2.250 in

B

 N/A 1.500 in

D

 N/A 2.125 in
F2 N/A 3/8 x 5/8 in
L - Short Hex Key3 N/A 1.375 in
L - Standard Key4 N/A 0.813 in
M - Short Hex Key5 N/A 1.625 in
M - Key6 N/A 1.063 in

Weight

 N/A 1.000 lb
  • 1 All bore ranges available in 1/16th inch increments.
  • 2 2 Required
  • 3 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
  • 4 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
    Standard hex key cut to minimum usable length.
  • 5 Space required to remove bushing using jackscrews - no puller required.
  • 6 Space required to remove bushing using jackscrews - no puller required.
    Standard hex key cut to minimum usable length.