Super Series
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.
1 - 25 of 42 | Results Per Page | View | Unit of Measure
1 2 

Item #

ANSI No.

Standard Type of Pin

Strand

P - Pitch

R - Roller Diameter

W - Width Between Roller Link Plates

N/A 80 N/A Riveted N/A Single N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Riveted N/A Single N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Riveted N/A Single N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Riveted N/A Single N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 160 N/A Riveted N/A Single N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 200 N/A Riveted N/A Single N/A 2.500 in N/A 1.562 in N/A 1.500 in
N/A 240 N/A Riveted N/A Single N/A 3.000 in N/A 1.875 in N/A 1.875 in
N/A 80 N/A Riveted N/A Double N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Riveted N/A Double N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Riveted N/A Double N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Riveted N/A Double N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 160 N/A Riveted N/A Double N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 200 N/A Riveted N/A Double N/A 2.500 in N/A 1.562 in N/A 1.500 in
N/A 240 N/A Riveted N/A Double N/A 3.000 in N/A 1.875 in N/A 1.875 in
N/A 80 N/A Riveted N/A Triple N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Riveted N/A Triple N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Riveted N/A Triple N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Riveted N/A Triple N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 160 N/A Riveted N/A Triple N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 200 N/A Riveted N/A Triple N/A 2.500 in N/A 1.562 in N/A 1.500 in
N/A 240 N/A Riveted N/A Triple N/A 3.000 in N/A 1.875 in N/A 1.875 in
N/A 80 N/A Cottered N/A Single N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Cottered N/A Single N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Cottered N/A Single N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Cottered N/A Single N/A 1.750 in N/A 1.000 in N/A 1.000 in
1 - 25 of 42 | Results Per Page | View | Unit of Measure
1 2